Waterproof butyl overseal tape primarily used to link the perpendicular joint between wall membrane and floor membrane installations. Also used to seal joints on floor membrane applications and for detailing penetrating services.
Waterproof butyl 75mm overseal tape for sealing over membrane joints, butt joints and overlaps to provide additional protection. Drybase Overseal Tapes are utilised for sealing over joints between Drybase cavity drain membranes and other materials. They can also be applied for sealing around services and challenging details.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
Waterproof butyl overseal tape primarily used to link the perpendicular joint between wall membrane and floor membrane installations. Also used to seal joints on floor membrane applications and for detailing penetrating services.
Waterproof butyl 75mm overseal tape for sealing over membrane joints, butt joints and overlaps to provide additional protection. Drybase Overseal Tapes are utilised for sealing over joints between Drybase cavity drain membranes and other materials. They can also be applied for sealing around services and challenging details.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.