Sovereign Corner Strip is a synthetic butyl/rubber based extruded strip sealant laminated with a PVC liner. It is primarily used for creating a seal over joints between SovDrain membranes, as part of the SovDrain waterproofing system.
Size
150mm x 20m
Length
20m
Thickness
1mm
Width
150mm
Material
Synthetic Butyl/Rubber-based Extruded Strip Sealant with PVC Liner
Visqueen Building Products ECO TPS range is a blown film of extruded low-density polyethylene. Visqueen ECO TPS range is a high quality Temporary Protective Sheeting (TPS) manufactured from 100% Recycled LDPE.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
Visqueen Low Permeability Gas Membrane offers a safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane gas when installed in accordance with the relevant codes of practice
Sovereign Corner Strip is a synthetic butyl/rubber based extruded strip sealant laminated with a PVC liner. It is primarily used for creating a seal over joints between SovDrain membranes, as part of the SovDrain waterproofing system.
Visqueen Building Products ECO TPS range is a blown film of extruded low-density polyethylene. Visqueen ECO TPS range is a high quality Temporary Protective Sheeting (TPS) manufactured from 100% Recycled LDPE.
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Visqueen Low Permeability Gas Membrane offers a safe solution for the protection of buildings against radon, carbon dioxide and low levels of methane gas when installed in accordance with the relevant codes of practice