Dryrod Damp-Proofing Rods Next Generation DPC - The most effective form of damp proofing for walls; outperforms creams, gels or liquids. BBA approved.
Fast & Simple to Install DIY rising damp treatment. Less messy than older traditional damp course injection creams or liquids
No specialist equipment required - simply insert into 12mm holes in the mortar lines of a building to form a powerful waterproof barrier
Exact Dosage - Delivers the correct dose every time eliminating guesswork.
BBA Approved The High-Performance DPC Treatment is Certified by the British Board of Agriment to be effective against the ingress of moisture for at least 20 years
Effective in both new (alkaline) and old (neutral) mortar.
Order in singles. See Tech Spec for pack quantity. Celcon Standard grade is extremely versatile and can be used below DPC as infill for Beam and Block flooring systems, as well as above the ground in walling applications
In continuous production since 1877, the iconic London Brick has been used in the building of almost a quarter of England’s housing stock. It’s an astonishing legacy for a product that is still made in the same way as it was over 140 years ago. Today, London Brick is produced primarily for the residential renovation, maintenance and improvement (RMI) market. The 23 styles and colours in its range are designed to match the five million homes built using London Bricks as owners look to improve and extend their homes.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
Order in singles. See Tech Spec for pack quantity. Celcon Standard grade is extremely versatile and can be used below DPC as infill for Beam and Block flooring systems, as well as above the ground in walling applications
In continuous production since 1877, the iconic London Brick has been used in the building of almost a quarter of England’s housing stock. It’s an astonishing legacy for a product that is still made in the same way as it was over 140 years ago. Today, London Brick is produced primarily for the residential renovation, maintenance and improvement (RMI) market. The 23 styles and colours in its range are designed to match the five million homes built using London Bricks as owners look to improve and extend their homes.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.