Tetrion All Purpose Filler is tough and water-resistant. Developed to be highly versatile, it can be used for either interior or exterior jobs. Tetrion seals, bonds and fills most household materials including, plaster, wood, stone, concrete, glass, metal and brickwork
Interior or Exterior Use
Interior/Exterior
Drying Time
24 Hours
Paintable
Only paint over the filler when completely dry, this takes a minimum of 24 hours
Proguard Window Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for the protection of windows, glazed panels and window frames which are often susceptible to scratches, plaster and paint splashes, especially during refurbishment.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Window Film Applicator or by hand.
The low tack adhesive backing adheres to most surfaces without any tape required and will stay securely in place once applied. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films. Unlike some alternative products, Proguard Window Film has anti-UV properties to ensure that direct sunlight does not cause the adhesive to transfer onto the windows.
Mixes to a smooth, creamy consistency. Special binders give guaranteed adhesion and a fill which will not shrink or crack. It is the ideal versatile filler suitable for a variety of jobs, even large areas.
Ronseal High Performance Wood Filler is designed to repair any wood, inside or out. It fills to any depth and is dry in just 30 minutes. This filler has superior adhesive qualities, which will last for years even when exposed to harsh weather conditions.
To apply, mix a pea-sized amount of hardener with a golf ball-sized amount of filler. Keep mixing until it’s all one colour – you can do this easily in the lid. Test the filler on a small area to check you’re happy with the colour. If you are, pack the filler into the hole and leave some raised above the surface to make sure it’s properly filled. Before it hardens, smooth it over with a knife. You have roughly 20 minutes to carve or shape the filler before it hardens.
After 30 minutes, the wood filler will be hard and you can sand, plane, file, nail or screw it. You can also stain, varnish or paint over it.
Tetrion All Purpose Filler is tough and water-resistant. Developed to be highly versatile, it can be used for either interior or exterior jobs. Tetrion seals, bonds and fills most household materials including, plaster, wood, stone, concrete, glass, metal and brickwork
Proguard Window Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for the protection of windows, glazed panels and window frames which are often susceptible to scratches, plaster and paint splashes, especially during refurbishment.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Window Film Applicator or by hand.
The low tack adhesive backing adheres to most surfaces without any tape required and will stay securely in place once applied. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films. Unlike some alternative products, Proguard Window Film has anti-UV properties to ensure that direct sunlight does not cause the adhesive to transfer onto the windows.
Mixes to a smooth, creamy consistency. Special binders give guaranteed adhesion and a fill which will not shrink or crack. It is the ideal versatile filler suitable for a variety of jobs, even large areas.
Ronseal High Performance Wood Filler is designed to repair any wood, inside or out. It fills to any depth and is dry in just 30 minutes. This filler has superior adhesive qualities, which will last for years even when exposed to harsh weather conditions.
To apply, mix a pea-sized amount of hardener with a golf ball-sized amount of filler. Keep mixing until it’s all one colour – you can do this easily in the lid. Test the filler on a small area to check you’re happy with the colour. If you are, pack the filler into the hole and leave some raised above the surface to make sure it’s properly filled. Before it hardens, smooth it over with a knife. You have roughly 20 minutes to carve or shape the filler before it hardens.
After 30 minutes, the wood filler will be hard and you can sand, plane, file, nail or screw it. You can also stain, varnish or paint over it.