This product is serving its purpose. My main issue is that it says it is recyclable. I'd love to know how this is possible - otherwise it's just the usual unsubstantiated claim.
5 months ago
Joanne
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
Will definitely buy again
Use d as a finished layer when securing insulation into a timber garage door. All nice and neat. Great product, easily cut & fastened by staple gun for my use.
11 months ago
customer
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Very useful
Used during a bathroom change. Perfect for protecting new flooring while tiling etc was done.
4 years ago
Peter
Type of purchase: Trade
Yes, I would recommend to a friend
1
0
5
Will use again
Bought to protect a carpet while using a cement based product nearby. It is a waterproof very lightweight yet reasonably strong product. It can be easily cut with a Stanley type of knife. Its construction is similar to corrugated cardboard - two plain layers either side of a corrugated layer. In use the corrugations soon collapse but this does not seem to stop the product doing its job. Cheaper than hardboard, and sufficiently rigid so it will not ruck up - makes this a satisfactory solution to the problem. The carpet was clean and undamaged when the sheet was removed.
The Proguard Armadillo Protection offers an eco-friendly high impact protection for tiled or polished surfaces including tiles, parquet, smooth concrete, epoxy sealer etc. A heavy-duty surface protection that will ensure your surface will remain protected. It is made from 100% recycled materials so protects our environment whilst protecting your surface. The material is composed of two layers.
Strong and flexible polyethylene waterproof sheet in 0.7mm thickness.
200gsm non-woven fabric for absorbing and softening impact of moving, dragging and falling objects.
Proguard debris containment netting is manufactured from a knitted fabric which has an open mesh construction to reduce wind loading on scaffold structures. The netting is manufactured from heavy duty 70gsm material and is designed to be fixed to the outside of the scaffolding framework for the safety of employees, pedestrians, buildings and traffic around the perimeter of the construction site. It is secured by using cable ties, achieving a fixing pattern of approximately one cable tie per metre in each direction.
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
This specially created foam protection is highly versatile providing excellent impact protection. They are extremely hard wearing and can be reused. The self-gripping u-profile tube is shaped to clip directly onto the handrail or balustrade without the need for additional fixing.
The Proguard Armadillo Protection offers an eco-friendly high impact protection for tiled or polished surfaces including tiles, parquet, smooth concrete, epoxy sealer etc. A heavy-duty surface protection that will ensure your surface will remain protected. It is made from 100% recycled materials so protects our environment whilst protecting your surface. The material is composed of two layers.
Strong and flexible polyethylene waterproof sheet in 0.7mm thickness.
200gsm non-woven fabric for absorbing and softening impact of moving, dragging and falling objects.
Proguard debris containment netting is manufactured from a knitted fabric which has an open mesh construction to reduce wind loading on scaffold structures. The netting is manufactured from heavy duty 70gsm material and is designed to be fixed to the outside of the scaffolding framework for the safety of employees, pedestrians, buildings and traffic around the perimeter of the construction site. It is secured by using cable ties, achieving a fixing pattern of approximately one cable tie per metre in each direction.
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
This specially created foam protection is highly versatile providing excellent impact protection. They are extremely hard wearing and can be reused. The self-gripping u-profile tube is shaped to clip directly onto the handrail or balustrade without the need for additional fixing.