Automatic model - Incorporates a tube type float switch for narrow sump applications, which will turn on at 184mm and off at 100mm
Fitted with a carbon/ceramic mechanical seal, in an intermediate oil chamber, with an inner lip seal. This construction offers good wear resistance and protection in the event of short periods of dry running
Tackle tough grease, oil, and grime with ease using the compact yet powerful V-TUF HD140HOT industrial hot water pressure washer – your go-to solution for fast, effective cleaning without harsh chemicals.
The LSC1.4S or “puddle sucker� is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking
This suction and delivery hose is constructed from a rigid, yet flexible, nylon material with an embedded spiral helix for reinforced construction and shock resistance. It is commonly used for the suction of various liquids and abrasive materials. These hoses can be used both on the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pump.
This Layflat Hose, with its lightweight structure, easy movement and storage, is faultless for use on the delivery side of submersible, centrifugal and surface mounted water pumps. Requiring no real installation, except rolling and laying, it lies flat on the ground when idle, but with water pressure, it delivers pumped water to exactly where it is required. Â
Tackle tough grease, oil, and grime with ease using the compact yet powerful V-TUF HD140HOT industrial hot water pressure washer – your go-to solution for fast, effective cleaning without harsh chemicals.
The LSC1.4S or “puddle sucker� is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking
This suction and delivery hose is constructed from a rigid, yet flexible, nylon material with an embedded spiral helix for reinforced construction and shock resistance. It is commonly used for the suction of various liquids and abrasive materials. These hoses can be used both on the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pump.
This Layflat Hose, with its lightweight structure, easy movement and storage, is faultless for use on the delivery side of submersible, centrifugal and surface mounted water pumps. Requiring no real installation, except rolling and laying, it lies flat on the ground when idle, but with water pressure, it delivers pumped water to exactly where it is required. Â