The LSC1.4S or “puddle sucker� is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking
This sediment filter sack is a filtration system, accepted by the Environment Agency, that controls flows and cleanses the water of silt and sediment and can detect the presence of hydrocarbons
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
Built using high quality materials including a glass reinforced polyamide resin body and die-cast aluminum gear casing, the G12STX offers performance and durability. Weighing in at just 1.4kg and measuring only 254mm (10 in) long, the G12STX allows for optimal control while providing a high power to weight ratio.
With a 580W motor, the G12STX is perfect for the grinding of metal or masonry, paint and rust removal, or sanding. With a low profile head and compact body, the G12STX gets into the tightest corners, while a small grip perimeter and forward canted side handle add comfort and reduce user fatigue.
Externally accessible brushes for effortless maintenance on the job site.
The LSC1.4S or “puddle sucker� is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking
This sediment filter sack is a filtration system, accepted by the Environment Agency, that controls flows and cleanses the water of silt and sediment and can detect the presence of hydrocarbons
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
Built using high quality materials including a glass reinforced polyamide resin body and die-cast aluminum gear casing, the G12STX offers performance and durability. Weighing in at just 1.4kg and measuring only 254mm (10 in) long, the G12STX allows for optimal control while providing a high power to weight ratio.
With a 580W motor, the G12STX is perfect for the grinding of metal or masonry, paint and rust removal, or sanding. With a low profile head and compact body, the G12STX gets into the tightest corners, while a small grip perimeter and forward canted side handle add comfort and reduce user fatigue.
Externally accessible brushes for effortless maintenance on the job site.