Fire performance: Surface spread of flame: Class 1 (BS 476, Part 7), Euroclass F (BS EN 13501-1)
Light weight and easy to handle
Easy and fast installation
Bitumen coated glass fleece
Light and easy to install
The CCPI verification mark only applies to Powerdeck U PIR Insulation board ONLY and does not cover the whole system. Find out more about the CCPI - https://www.cpicode.org.uk/about/
Technical specification
Length
1200 mm
Thickness
120 mm
Width
600 mm
Material
PIR
Usage
Warm flat roofs with any hot applied waterproofing system (including torch-on) and any bitumen compatible single-ply membrane system.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
SuperFOIL SUPERIOR Foil Tape is a glass fibre reinforced tape, suitable for use with all non-breathable SuperFOIL products. It's superior adhesive makes easy work of sealing overlaps, joints and penetrations and is ideal for use in cold weather.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Range Description
FIREPRO
Brand Name
Rockwool
Manufacturer Model No
212902
Size
310 ml
Container Type
Cartridge
Certifications Met
CoCoP: 2531-CPR-CXO10266, ETA - 20/1129, ETA - 20/1130, UL-EU: 01203-CPR
This Knauf Insulation Loft Roll 44 Combi Cut Short Length has a thickness of 20cm, providing a total coverage area of 5.501m2. Loft Roll 44 is an A1 non-combustible glass mineral wool roll, manufactured using Knauf Insulation's unique ECOSE Technology and designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level.
Length
4830 mm
Thickness
200 mm
Width
1140 mm
Material
Glass Mineral Wool
Usage
For lofts where pitched roofs are insulated at ceiling level.
Coverage
5.501 m2
Fire Retardant
N
Thermal Conductivity
0.044 W/mK
Pack Quantity
1
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
SuperFOIL SUPERIOR Foil Tape is a glass fibre reinforced tape, suitable for use with all non-breathable SuperFOIL products. It's superior adhesive makes easy work of sealing overlaps, joints and penetrations and is ideal for use in cold weather.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
This Knauf Insulation Loft Roll 44 Combi Cut Short Length has a thickness of 20cm, providing a total coverage area of 5.501m2. Loft Roll 44 is an A1 non-combustible glass mineral wool roll, manufactured using Knauf Insulation's unique ECOSE Technology and designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level.