Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase Waterproof Plugging Compound 3kg
Hover Over to Zoom In
Overview
- Durable and high performance plugging compound
- Stop active water leaks on concrete
- Rapid 30 second setting time
- Pre-gauged and ready to mix
- For both indoors and outdoors
- Erosion resistant shoring of canal sealing
Technical specification
Size
3 kg
Interior or Exterior Use
Interior or Exterior Use
Drying Time
30 seconds
Time to Full Cure
30 seconds
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
Plugging Compound
Manufacturer Model No
TK-DRYBASE WATERPROOF PLUG 3KG
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
NEW
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
NEW
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
£9.08 each (Inc. VAT)
NEW
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
£50.46 each (Inc. VAT)
NEW
Everything you need to effectively eliminate black mould, clean staining and sanitise treated areas for long-lasting protection. Designed for domestic use in high-humidity areas like bathrooms, kitchens and utility rooms, the kit includes three powerful products for a complete three-stage process. Dryzone Mould Eliminator delivers fast-acting mould removal with visible results in minutes. Dryzone Mould Remover Gel targets stubborn surface stains in hard-to-reach places like silicone, behind fittings and around seals with a thick formula that clings in place for deep action. Apply Dryzone 100 Mould Sanitiser to neutralise invisible spores and bacteria, helping prevent recurrence and leaving the surface hygienically clean. This easy-to-use kit is suitable for use on tiles, painted walls, sealants, uPVC and most non-porous building surfaces.
£17.24 each (Inc. VAT)