Gypsum plasterboard moulding in traditional cove profile, for coving around the edge of ceilings and walls, gives an attractive decorative finish and hides any joint cracks between the wall and ceiling.
Speedfit Layflat Polybutylene barrier pipe has even greater flexibility making the system very easy to handle and worry free. Flexibility – The pipe is ideal for long runs where a softer pipe material is an advantage so cabling through joists becomes a simple task. Easier to handle – When removed from the coil, the pipe keeps straight and ‘lays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. barrier Layer – The pipe is made of 5 layers, the center of which is a coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components.
Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used.
Osma RoundLine is a 112mm (4½") gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe)
Gypsum plasterboard moulding in traditional cove profile, for coving around the edge of ceilings and walls, gives an attractive decorative finish and hides any joint cracks between the wall and ceiling.
Speedfit Layflat Polybutylene barrier pipe has even greater flexibility making the system very easy to handle and worry free. Flexibility – The pipe is ideal for long runs where a softer pipe material is an advantage so cabling through joists becomes a simple task. Easier to handle – When removed from the coil, the pipe keeps straight and ‘lays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. barrier Layer – The pipe is made of 5 layers, the center of which is a coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components.
Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used.
Osma RoundLine is a 112mm (4½") gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe)