Combi-cut products are supplied partially perforated, providing the flexibility to be used between joists or used uncut as a full-width roll, maximising on-site efficiency.
Manufactured in long lengths to allow quick and simple installation maximising on-site efficiency.
Compression packed and lightweight for easy handling and moving around a site.
Technical specification
Country Origin
UK
Brand Name
KNAUF INSULATION
CCPI verification number
000600173/0627
Length
5700 mm
Thickness
170 mm
Width
1140 mm
Material
Glass Mineral Wool
Usage
Thermal Loft insulation for a pitched roof at ceiling level only. Standard loft insulation which runs between timber joists and then cross layered on top.
Coverage
6.498 m2
Fire Retardant
N
Thermal Conductivity
0.044 W/mK
Pack Quantity
1
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
SuperFOIL SF40 delivers unmatched thermal performance in a multi foil insulation, offering the most
efficient and cost effective insulation solutions available.
3 in 1 product – High Performance Insulation, Vapour Control Layer and Radiant Barrier in one.
Suitable for New Build, Retrofit or Extensions in roof, wall and floor applications.
SuperFOIL SF19BB is a high performance multi foil insulation offering a fully breathable solution.
3 in 1 – High Performance Insulation, Breather membrane and Radiant Barrier all in one. Which means that you do not need to purchase or install a separate breather membrane, saving time and money.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Size
310 ml
Container Type
Cartridge
Certifications Met
CoCoP: 2531-CPR-CXO10266, ETA - 20/1129, ETA - 20/1130, UL-EU: 01203-CPR
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
SuperFOIL SF40 delivers unmatched thermal performance in a multi foil insulation, offering the most
efficient and cost effective insulation solutions available.
3 in 1 product – High Performance Insulation, Vapour Control Layer and Radiant Barrier in one.
Suitable for New Build, Retrofit or Extensions in roof, wall and floor applications.
SuperFOIL SF19BB is a high performance multi foil insulation offering a fully breathable solution.
3 in 1 – High Performance Insulation, Breather membrane and Radiant Barrier all in one. Which means that you do not need to purchase or install a separate breather membrane, saving time and money.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.