A brushless cordless hammer driver drill powered by 12V CXT slide Li-ion battery. Makita�s �CXT� range of 12v tools feature a slide battery, similar to the extremely successful 18v Li-Ion battery used in the heavier tool range, has multi-contact terminals to ensure stable contact even under extreme work vibration conditions. The slide battery fits easily into the tools and new chargers and has the same high level of structural strength as well as having built-in protection to prevent overload or over discharging. Comes with 2x 2.0ah batteries.
The New DH 36DPA SDS+ Rotary Hammer from HiKOKI comes packed full of features and benefits.
A fully brushless motor squeezes every last drop of power from the battery to give you the the same drilling speed as an equivalent corded model (DH28PCY) but in an easy to handle cordless package.
The DH 36DPA is the successor to the DH 36DBL and delivers the same 3.3 Joules of impact energy while being 0.9Kg lighter and a whole 39mm shorter than its predecessor. Same Power. Less Size
The highly efficient 36DPA will give you approximately 120 holes in concrete on a fully charged BSL36A18 Battery (with a 8.5x40mm bit)
The Makita HR4013C/1 is a 110 volt SDS MAX Rotary Hammer Drill with low vibraton AVT technology, 8 joules of impact energy and 40mm capacity in Concrete
Blows per Minute
2900bpm
Maximum Diameter (Masonry)
40mm
Wattage
1100W
No Load Speed
500rpm
Chuck Type
SDS MAX
Power Type
Corded
Cable Length
5000 mm
Voltage
110 V
Case
Yes
Includes
Side grip assy,latch,plastic case,side handle,grease,depth gauge,cloth,inner tray
This rotary hammer drill from Makita is used for drilling in concrete, steel and wood. Powered by DC supply, such as 18V Li-ion battery, it has high productivity and features a 30 percent reduction in energy loss. The rubber joint construction cushions the transmission of vibration, preventing damage to the battery.
A brushless cordless hammer driver drill powered by 12V CXT slide Li-ion battery. Makita�s �CXT� range of 12v tools feature a slide battery, similar to the extremely successful 18v Li-Ion battery used in the heavier tool range, has multi-contact terminals to ensure stable contact even under extreme work vibration conditions. The slide battery fits easily into the tools and new chargers and has the same high level of structural strength as well as having built-in protection to prevent overload or over discharging. Comes with 2x 2.0ah batteries.
The New DH 36DPA SDS+ Rotary Hammer from HiKOKI comes packed full of features and benefits.
A fully brushless motor squeezes every last drop of power from the battery to give you the the same drilling speed as an equivalent corded model (DH28PCY) but in an easy to handle cordless package.
The DH 36DPA is the successor to the DH 36DBL and delivers the same 3.3 Joules of impact energy while being 0.9Kg lighter and a whole 39mm shorter than its predecessor. Same Power. Less Size
The highly efficient 36DPA will give you approximately 120 holes in concrete on a fully charged BSL36A18 Battery (with a 8.5x40mm bit)
The Makita HR4013C/1 is a 110 volt SDS MAX Rotary Hammer Drill with low vibraton AVT technology, 8 joules of impact energy and 40mm capacity in Concrete
This rotary hammer drill from Makita is used for drilling in concrete, steel and wood. Powered by DC supply, such as 18V Li-ion battery, it has high productivity and features a 30 percent reduction in energy loss. The rubber joint construction cushions the transmission of vibration, preventing damage to the battery.