The Makita 4350FCT/2 240V jigsaws electronic speed control and soft start feature maintains optimum performance whilst the low vibration reduces user fatigue on prolonged use. The tool-less blade change system makes the blade change quick and easy. The built in job light illuminates the cut line in those hard to access dark spaces
Made To Order
N
Manufacturer Model No
4350FCT/2
Country Origin
Romania
Brand Name
Makita
Range Description
Jigsaw
Weight
4.10 kg
Maximum Cut at 90 Degrees
135 mm
Maximum Cut in Wood
135 mm
Maximum Cut in Steel
10 mm
Power Type
Corded
Stroke Length
26 mm
Strokes per Minute
0 - 2800 spm
Noise K Factor
3 dB(A)
Noise Sound Power
95 dB(A)
Noise Sound Pressure
84 dB(A)
Vibration K Factor
1.5 m/s2
Wattage
720 W
Voltage
240 V
Case
Yes
Includes
Anti Splintering Device-Cover Plate-Dust Nozzle & Case-Hex Wrench-Jig Saw Blade Set
Wet and dry L-class dust extractor. Class L - Removes 99.0% of dust with limit value for occupational exposure >1.0mg/m3 Suitable for processes involving mica, china clay, gypsum. 240 volt unit with power take off
Wet and Dry M-Class Dust Extractor 110V without power take-off Class M - Removes 99.9% of dust with Limit Value for occupational exposure > 0.1 mg/m³. Suitable for processes involving mica, china clay, gypsum, wood dust, such as softwood and hardwood and silica dust, such as masonry, concrete.
combination hammer based on predecessor model HR2610 but with improved operation mode change lever With this drill you will not need to rotate the chuck in order to switch between Rotation and Hammering modes. Hand pain and fatigue is minimised thanks to the rubberised soft-grip handle which complements the overall lightweight ergonomic design.
The Makita 4350FCT/2 240V jigsaws electronic speed control and soft start feature maintains optimum performance whilst the low vibration reduces user fatigue on prolonged use. The tool-less blade change system makes the blade change quick and easy. The built in job light illuminates the cut line in those hard to access dark spaces
Wet and dry L-class dust extractor. Class L - Removes 99.0% of dust with limit value for occupational exposure >1.0mg/m3 Suitable for processes involving mica, china clay, gypsum. 240 volt unit with power take off
Wet and Dry M-Class Dust Extractor 110V without power take-off Class M - Removes 99.9% of dust with Limit Value for occupational exposure > 0.1 mg/m³. Suitable for processes involving mica, china clay, gypsum, wood dust, such as softwood and hardwood and silica dust, such as masonry, concrete.
combination hammer based on predecessor model HR2610 but with improved operation mode change lever With this drill you will not need to rotate the chuck in order to switch between Rotation and Hammering modes. Hand pain and fatigue is minimised thanks to the rubberised soft-grip handle which complements the overall lightweight ergonomic design.