Drills are good. Well updated from the last models I had.
The box, however, is useless they really need to re think the box.
3 years ago
customer
Type of purchase: Trade
Yes, I would recommend to a friend
0
0
5
Good
Good
6 years ago
Jk from W138as
Type of purchase: Trade
Yes, I would recommend to a friend
0
0
4
Its good
Little expensive
6 years ago
jasheen
Type of purchase: Trade
Yes, I would recommend to a friend
0
0
4
Love the drills hate the box.
The Drills are great and the 5Ah Batteries are long lasting and pack a punch, Only downside would be the light plastic insert which holds the drills and charger in place, already broken and wished the box was the older flat box with compartment. But if you love to chuck your tools in a large empty box then this box is for you..
6 years ago
Ian
0
0
5
I would recommend, worth doing research on them
I use a lot of Makita tools as they have always proven to last a long time and are well built, price was good and these are my 2 nd set of drills
Heavy duty Brushless motor Twin pack. Supplied with 2 x 5.0Ah batteries, fast charger and carry case. The DHP481 Combi Drill features an all metal gearbox, all metal keyless chuck and maximum torque of 115Nm. The DTD154 Impact Driver features 3 speed electronic control with a maximum fastening torque of 175Nm. Both models feature job lights, variable speed, forward and reverse and soft grip handles.
Powerful impact driver, with the trade marked Drive Control system, allowing seemless shift between three speed settings. At just 130mm it is ideal for use in tight spaces and the one handed bit insertion, ensures swift bit changeover. Comes with two 5.0Ah RedLithium-Ion batteries and heavy duty case.
Maximum Torque
180
Number of Torque Settings
3
Brushless
Yes
No Load Speed
0-3400
Weight
1.70 kg
Power Type
Cordless
Battery Type
Li-Ion
Battery Storage Capacity
5.0 Ah
Number of Batteries
2
Charge Time
59 MINS
Voltage
18 V
Case
Yes
Includes
1 x M18BLID2 / 2 X M18B5 / 1 X M12-M18FC / 1 X DYNACASE
The Makita 8406 hammer drill has a torque limiter and a powerful motor. It can accept a large diamond core bit 152 mm (5-7/8") inch diameter. This tool is ideal for making clean-cut, smooth holes in tile, ferroconcrete, marble, brick, etc. Suitable for all sizes of dry diamond core making it suitable for copper pipe, waste pipe and even soil pipes.
Demolition Hammer with 7.6 joules of impact energy. Accepts SDS MAX points and chisels. Features soft start, constant speed and variable speed. Supplied with side handle and carry case
Heavy duty Brushless motor Twin pack. Supplied with 2 x 5.0Ah batteries, fast charger and carry case. The DHP481 Combi Drill features an all metal gearbox, all metal keyless chuck and maximum torque of 115Nm. The DTD154 Impact Driver features 3 speed electronic control with a maximum fastening torque of 175Nm. Both models feature job lights, variable speed, forward and reverse and soft grip handles.
Powerful impact driver, with the trade marked Drive Control system, allowing seemless shift between three speed settings. At just 130mm it is ideal for use in tight spaces and the one handed bit insertion, ensures swift bit changeover. Comes with two 5.0Ah RedLithium-Ion batteries and heavy duty case.
The Makita 8406 hammer drill has a torque limiter and a powerful motor. It can accept a large diamond core bit 152 mm (5-7/8") inch diameter. This tool is ideal for making clean-cut, smooth holes in tile, ferroconcrete, marble, brick, etc. Suitable for all sizes of dry diamond core making it suitable for copper pipe, waste pipe and even soil pipes.
Demolition Hammer with 7.6 joules of impact energy. Accepts SDS MAX points and chisels. Features soft start, constant speed and variable speed. Supplied with side handle and carry case