Eazi Clips are used to clip polythene sheeting to the Eazi Props.� This helps to ensure the polythene remains taught and is not pulled loose by air movement.
Application:
Push the clip onto the pole with the polythene in-between to hold it in place.� Aproximately 3 clips should be used per prop.
�
Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications. The flexible piping system provides the ability to significantly reduce installation time without the need for specialist tools. The fittings can be demounted if required, are lead free, and remove the risk of any scale build up. Extensive tests have shown that Speedfit products will withstand temperatures and pressures well in excess of normal working conditions. JG Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' which inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. The white and grey collet clips can be used to prevent accidental release of pipe when using standard Speedfit connections. The red and blue variety, are simply for colour coding. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Osma Push-fit Waste is a simple to use system with quick efficient assembly via push-fit jointing, saving you time and site costs. 32,40 & 50mm sizes in black, grey and white.
Eazi Clips are used to clip polythene sheeting to the Eazi Props.� This helps to ensure the polythene remains taught and is not pulled loose by air movement.
Application:
Push the clip onto the pole with the polythene in-between to hold it in place.� Aproximately 3 clips should be used per prop.
�
Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications. The flexible piping system provides the ability to significantly reduce installation time without the need for specialist tools. The fittings can be demounted if required, are lead free, and remove the risk of any scale build up. Extensive tests have shown that Speedfit products will withstand temperatures and pressures well in excess of normal working conditions. JG Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' which inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. The white and grey collet clips can be used to prevent accidental release of pipe when using standard Speedfit connections. The red and blue variety, are simply for colour coding. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Osma Push-fit Waste is a simple to use system with quick efficient assembly via push-fit jointing, saving you time and site costs. 32,40 & 50mm sizes in black, grey and white.