Hover Over to Zoom In
Overview
- Made from high quality polypropylene
- All sizes of the Talon Hinged Clip can be connected together via the dovetail to allow for equal pipe spacing
- Self-locking tops
- Clip spacer fits to the base of the pipe clip, creating clearance required for pipe insulation
- Manufactured in the UK
Technical specification
Brand Name
Talon
Manufacturer Model No
TS22
Made To Order
N
Diameter
22 mm
Width
290 mm
Material
Polypropylene
Colour
White
Type
Hinged Pipe Clips
Data sheets
Reviews
Be the first to review this product.
JG Speedfit Layflat polybutylene pipe coil 22mm x 50m
Speedfit Layflat Polybutylene barrier pipe has even greater flexibility making the system very easy to handle and worry free. Flexibility – The pipe is ideal for long runs where a softer pipe material is an advantage so cabling through joists becomes a simple task. Easier to handle – When removed from the coil, the pipe keeps straight and ‘lays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. barrier Layer – The pipe is made of 5 layers, the center of which is a coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components.
£216.08 each (Inc. VAT)
JG Speedfit PEX barrier pipe length 22mm x 3m
Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used
£13.56 per length (Inc. VAT)
JG Speedfit 4 way manifold 22 x 10mm Pack 5
Speedfit is the easy to use, plastic push-fit system. The 4-way push-fit in-line manifold is suitable for central heating applications. Designed, manufactured and assembled in the UK by John Guest
£108.54 per bag (Inc. VAT)
JG Speedfit elbow 22mm
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£4.74 each (Inc. VAT)