Imposes less stress on substrate during installation due to no expansion force
Small hole diameter giving high loads
Easily removed for temporary works
Suitable for use in pre-drilled 6mm diameter concrete, full and hollow bricks, stone and structural clay tile and without pre-drilling in aerated concrete and timber
Applications include use with door and window frames, suspended ceilings and lightweight steel angles
Gypsum plasterboard with a higher density noise insulating core and a blue paper face for easy recognition. The higher density core design of this board enables the wall, partition and ceiling systems to provide greater sound insulating performance levels over standard products by reducing the transmission of sound between rooms.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
Gyproc Soundbloc F Plasterboard is a sound resistant special gypsum board which consisting of an aerated gypsum core encased in and firmly bonded to, strong paper liners that are blue. They are manufactured through a special process which gives it excellent sound insulating properties. This product is perfect for any room or building that requires Acoustic insulation such as; cinemas, offices or domestic use and comes in a Tapered edge finish.
Gyproc plasterboard in small easy-to-handle sizes.
Smaller easy-to-use, carry and install board with a specially modified liner and controlled suction. It enables easier fixing to 16” and 24” joist centres for ceiling lining. The board is suitable for direct decoration or a Thistle plaster finish. Length is compatible with both 16inch and 24inch joist centres, for ceiling linings.
Gypsum plasterboard with a higher density noise insulating core and a blue paper face for easy recognition. The higher density core design of this board enables the wall, partition and ceiling systems to provide greater sound insulating performance levels over standard products by reducing the transmission of sound between rooms.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
Gyproc Soundbloc F Plasterboard is a sound resistant special gypsum board which consisting of an aerated gypsum core encased in and firmly bonded to, strong paper liners that are blue. They are manufactured through a special process which gives it excellent sound insulating properties. This product is perfect for any room or building that requires Acoustic insulation such as; cinemas, offices or domestic use and comes in a Tapered edge finish.
Gyproc plasterboard in small easy-to-handle sizes.
Smaller easy-to-use, carry and install board with a specially modified liner and controlled suction. It enables easier fixing to 16” and 24” joist centres for ceiling lining. The board is suitable for direct decoration or a Thistle plaster finish. Length is compatible with both 16inch and 24inch joist centres, for ceiling linings.