





























Compression fittings join pipework with a nut and olive, creating a seal without soldering. They are a practical choice for plumbing compression fittings on copper pipe and other compatible pipework where you need a serviceable joint.
They are often chosen when access matters, or when you may need to disconnect a component later. If you are comparing compression fitting types with other jointing methods, check the pipe material and the connection point before you order.
They suit bathrooms, boiler pipework and radiator connections, and they are handy for repairs or alterations to existing runs. Because you can undo and remake the joint, they work well at connection points where access counts, such as under a basin, at an isolating valve or where a component may need to come off later.
The common styles cover most jobs:
Straight connectors for joining two lengths of pipe in a run.
Compression elbow fittings for turning a corner without cutting into the wall or floor.
Compression tee fittings for branching off an existing run to feed another point.
Most compression fittings are designed for copper pipe. If you are working with plastic pipe, check the manufacturer's compatibility guidance and use a pipe insert where required, as not every fitting is rated for both.
Start with the pipe material. Match brass compression fittings to the job and check the finish and specification against the pipe.
Match the fitting to the pipework layout, a straight connector joins a run, an elbow changes direction and a tee lets you branch off.
Measure the pipe by outside diameter, not the bore.
Check the thread form where the fitting connects to a valve or component.
Make sure there is room to get a spanner on the nut.
Confirm whether the fitting is for cold water, hot water or heating.
Check the pipe size before you buy.
Most sizing mistakes come from mixing up outside diameter and bore, or from ordering the wrong thread type at the connection point.
They may not be the best choice where you do not have enough access to tighten the nut properly, or where the pipe material is not compatible with the fitting specification.
If you need help confirming the right part, use our branch network, Click & Collect and trade advice to check the fitting before you take it away.
Our range covers the everyday essentials for many plumbing jobs. Compare products by compression fitting type so you can find the right part fast.
Browse straight connectors for joining runs, compression elbow fittings for changing direction and compression tee fittings for branching off, in the common sizes for copper pipe. With reliable stock across a nationwide branch network, Click & Collect and expert advice from people who know what's what, you can buy compression fittings online and pick them up in branch and get the job sorted.