Wavin Osma Push-fit Waste is a simple to use system with quick efficient assembly via push-fit jointing, saving you time and site costs. 32,40 & 50mm sizes in black, grey and white.
90 degree bend with push-fit sockets
Simple-to-use system saving time and site costs
Quick, efficient assembly by means of push-fit jointing
Suitable for use with intermittent discharges of water up to 90°C
From Glow-Worm, their 90 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 90 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 90 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
From Glow-Worm, their 45 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 45 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' that inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. To help create a tighter bend than the minimum allowed when the pipe is unsupported.
Wavin Osma Push-fit Waste is a simple to use system with quick efficient assembly via push-fit jointing, saving you time and site costs. 32, 40 and 50mm sizes in black, grey and white.
From Glow-Worm, their 90 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 90 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 90 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
From Glow-Worm, their 45 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 45 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' that inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. To help create a tighter bend than the minimum allowed when the pipe is unsupported.
Wavin Osma Push-fit Waste is a simple to use system with quick efficient assembly via push-fit jointing, saving you time and site costs. 32, 40 and 50mm sizes in black, grey and white.