Imposes less stress on substrate during installation due to no expansion force
Small hole diameter giving high loads
Easily removed for temporary works
Suitable for use in pre-drilled 6mm diameter concrete, full and hollow bricks, stone and structural clay tile and without pre-drilling in aerated concrete and timber
Applications include use with door and window frames, suspended ceilings and lightweight steel angles
Gypsum plasterboard with a higher density noise insulating core and a blue paper face for easy recognition. The higher density core design of this board enables the wall, partition and ceiling systems to provide greater sound insulating performance levels over standard products by reducing the transmission of sound between rooms.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered or decorated, Not suitable for moist or wet conditions. A tapered edge version is also available.
Gyproc Thermaline Basic Plasterboard provides a basic level of thermal insulation, where needed. This product is ideal for areas that need low-level thermal insulation upgrade. Gyproc Wall Board factory-bonded to an expanded polystyrene insulant that is both CFC and HCFC-free – meaning zero ODP (Ozone Depletion Potential). Can be used in both refurbishment and new-build where a basic level of additional thermal insulation is required. This product has a Tapered Edge finish.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
Gypsum plasterboard with a higher density noise insulating core and a blue paper face for easy recognition. The higher density core design of this board enables the wall, partition and ceiling systems to provide greater sound insulating performance levels over standard products by reducing the transmission of sound between rooms.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered or decorated, Not suitable for moist or wet conditions. A tapered edge version is also available.
Gyproc Thermaline Basic Plasterboard provides a basic level of thermal insulation, where needed. This product is ideal for areas that need low-level thermal insulation upgrade. Gyproc Wall Board factory-bonded to an expanded polystyrene insulant that is both CFC and HCFC-free – meaning zero ODP (Ozone Depletion Potential). Can be used in both refurbishment and new-build where a basic level of additional thermal insulation is required. This product has a Tapered Edge finish.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.