Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Mapei Latexplan Trade 30kg Two-Part Floor Levelling Kit
Hover Over to Zoom In
Frequently bought together
Overview
- Superior Versatility: Suitable for use over a wide range of substrates, including sand/cement screeds, concrete, and existing non-absorbent surfaces.
- Fast-Setting Formula: Walk on your new floor in just 2 - 3 hours and install floor coverings after 12 hours.
- Protein-Free & Low Odour: Ideal for use in sensitive environments like hospitals, schools, and food preparation areas.
- Excellent Bond Strength: Chemically engineered to adhere strongly to the subfloor, reducing the risk of delamination.
- User-Friendly Application: Its smooth consistency allows for easy trowelling and excellent flow properties.
Technical specification
Brand Name
MAPEI
Size
30 kg
Application Thickness
3mm to 10mm in a single application
Drying Time
Approx. 2–3 hours
Walk On Hardness Time
120 mins
Working Time
60 mins
Type
Levelling Compound
Reviews
Be the first to review this product.
Sika Frosterproofer 1L
Sika MaxMix Frostproofer & Accelerator is a liquid admixture for mortars and concrete. It can be used in all situations where reduced setting time is required. For working at temperatures down to -2 degrees. 1 litre treats up to 100kg of cement.
£19.67 each (Inc. VAT)
Sika 1 Integral Liquid Waterproofer 25L
Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
£434.32 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Sika Grey Damp Proofing Slurry 25kg
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
£59.11 each (Inc. VAT)