Wavin OsmaWeld bend 87.5° 32mm white
Hover Over to Zoom In
Overview
- Wavin OsmaWeld solvent weld waste is manufactured in ABS offering secure jointing, a wide range of fittings (32/40 & 50mm) and black, grey and white colour options.
- 87.5 degree bend with solvent weld sockets
- Secure jointing method
- Suitable for use with a constant 60°C temperature and intermittent discharges of water up to 90°C
- Kitemarked to BS EN 1455-1:2000
Technical specification
Country Origin
United Kingdom
Brand Name
Osma
Range Description
OsmaWeld
Manufacturer Model No
4Z161W
Made To Order
N
Suitable for
Domestic use
Diameter
32 mm
Length
74 mm
Minimum Diameter
32 mm
Maximum Diameter
32 mm
Connection Type
Weld
Material
ABS
Maximum Pressure
0.5 bar
Colour
White
Finish
Smooth
Years Guaranteed
1
Type
Bend
Reviews
Be the first to review this product.
CLEARANCE
From Glow-Worm, their 90 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 90 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 90 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
£26.47 each (Inc. VAT)
CLEARANCE
From Glow-Worm, their 45 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 45 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
£51.31 each (Inc. VAT)
CLEARANCE
Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' that inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. To help create a tighter bend than the minimum allowed when the pipe is unsupported.
£5.36 each (Inc. VAT)
Profix PVC Inspection Bend White 20mm
ONLINE ONLY- Selected products will qualify for FREE next working day delivery for online orders over 25 Pounds inc VAT and placed before 9pm Monday - Thursday or 6pm Sunday
£1.19 each (Inc. VAT)