The Drybase Plaster Membrane Kit is an easy-to-use way to prepare damp walls for replastering with traditional plasters or plasterboards. It is the ideal solution for high-speed damp-proof replastering jobs. This kit comes with all the equipment you need to replaster 20 m2 of wall.
Sovereign Fleeced Overseal Tape is a synthetic butyl/rubber based preformed strip sealant laminated with a non woven polyester fleece. It's primarily used for creating a joint overseal where SovDrain Cavity Drain Membranes are used.
Size
2mm x 100mm x 10m
Length
10m
Thickness
2mm ± 0.2mm
Width
100mm
Material
Synthetic Butyl/Rubber Sealant Laminated with Non-woven Polyester Fleece
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Size
1.2 × 15 m
Length
15 m
Thickness
1.5 mm
Width
1.2 m
Weight
9.6
Material
Fleece
Colour
Black
Coverage
1 × 15 m
Pack Quantity
1
Certifications Met
ISO 9001, ISO 14001, Fire Rating: Class F (EN 13501)
The Drybase Plaster Membrane Kit is an easy-to-use way to prepare damp walls for replastering with traditional plasters or plasterboards. It is the ideal solution for high-speed damp-proof replastering jobs. This kit comes with all the equipment you need to replaster 20 m2 of wall.
Sovereign Fleeced Overseal Tape is a synthetic butyl/rubber based preformed strip sealant laminated with a non woven polyester fleece. It's primarily used for creating a joint overseal where SovDrain Cavity Drain Membranes are used.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.