Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Dryzone DPC Plugs For Bricks And Mortar Buff Pack Of 100
Hover Over to Zoom In
Frequently bought together
Overview
- Dryzone DPC Plugs are used for covering exterior injection holes to protect from the elements.
- Quick and easy installation, offers a clean finish
- Colour match to most mortars
- Easily fill 10-12 mm diameter holes
- Convenient pack size - covers 12 metres with 120mm centres
Technical specification
Size
100 Pack
Interior or Exterior Use
Exterior
VOC Level
Minimal 0-0.29%
Colour
Buff
Type
DPC Plugs
Manufacturer Model No
FG-A00346-002
Brand Name
Dryzone
Reviews
Be the first to review this product.
Safeguard Drybase Overseal Tapes 150MM X 20M
Waterproof butyl overseal tape primarily used to link the perpendicular joint between wall membrane and floor membrane installations. Also used to seal joints on floor membrane applications and for detailing penetrating services.
£70.38 each (Inc. VAT)
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Safeguard Drybase Liquid Damp-proof Membrane 1L White
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
£35.42 each (Inc. VAT)
Sovereign 30806093 CDM Plug Washers Pack 100
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications.
£2,311.20 each (Inc. VAT)