This product is made up of gypsum fibreboard which combines gypsum, cellulose fibres from recycled paper and water to form a dense sheet material.
Use it as part of GypWall Single Frame Enhanced, a system with increased rigidity and durability, high levels of sound insulation and excellent fixing strength. Use it in off-site manufacture and high traffic areas where robust characteristics and/or fixing strength are required.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered or decorated, Not suitable for moist or wet conditions. A tapered edge version is also available.
Gyproc Thermaline Plus is a wallboard bonded to a expanded polystyrene insulant, with integral vapour control provided by the products closed cell structure in the foam. A cost-effective thermal laminate for new and existing buildings requiring a mid to high thermal performance levels.
Strong, Versatile and good value, Knauf Wallboard is a standard Plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A. Available in Square Edge.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered or decorated, Not suitable for moist or wet conditions. A tapered edge version is also available.
Gyproc Thermaline Plus is a wallboard bonded to a expanded polystyrene insulant, with integral vapour control provided by the products closed cell structure in the foam. A cost-effective thermal laminate for new and existing buildings requiring a mid to high thermal performance levels.
Strong, Versatile and good value, Knauf Wallboard is a standard Plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A. Available in Square Edge.