Ease of installation SimpleSwitch to previous Worcester i System models with pre-piping jig offering rear piping as standard
Flexibility of siting provided by long flue lengths (up to 12m with 60/100mm flues) and a 500ml integrated condensate siphon to reduce the risk of freezing
Complete peace of mind for the end user with a 10-year heat exchanger and a 7-year product guarantee available as standard. Wide modulation range designed to optimise efficiency when heating demand is low.
High-end design, quiet operation (up to 42dB(A)) with an intuitive, long text, colour boiler display for ease of use
Most commonly used in vertical flue installations, the 1000mm flue extension, from Baxi, allows you to increase the length of a standard flue pipe, permitting further control over where plume is released from the property, avoiding neighbouring properties and other unsuitable areas. The flue extension is both quick to install and aesthetically pleasing, allowing it to blend in with the rest of the boiler system.
When installing a vertical flue to come out the roof, keeping the elements out of any gaps or cracks should be a top priority. Water penetration should be a major concern, and dealt with accordingly using the Worcester Pitched Flashing kit, ensuring that no water can get through the roof.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
The CombiPack4 programmable wireless thermostat and receiver offers a simple and reliable solution for controlling your heating system. Features such as OpenTherm, Optimum Start, TPI and boost make it a versatile solution for all applications. The pre-paired thermostat and receiver are supplied with EPH Controls market leading 5 year warranty.
Most commonly used in vertical flue installations, the 1000mm flue extension, from Baxi, allows you to increase the length of a standard flue pipe, permitting further control over where plume is released from the property, avoiding neighbouring properties and other unsuitable areas. The flue extension is both quick to install and aesthetically pleasing, allowing it to blend in with the rest of the boiler system.
When installing a vertical flue to come out the roof, keeping the elements out of any gaps or cracks should be a top priority. Water penetration should be a major concern, and dealt with accordingly using the Worcester Pitched Flashing kit, ensuring that no water can get through the roof.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
The CombiPack4 programmable wireless thermostat and receiver offers a simple and reliable solution for controlling your heating system. Features such as OpenTherm, Optimum Start, TPI and boost make it a versatile solution for all applications. The pre-paired thermostat and receiver are supplied with EPH Controls market leading 5 year warranty.