We'll be performing scheduled maintenance from 10:00pm Tuesday 2nd of June until 1:00am Wednesday 3rd of June. During this time, checkout, invoice payments and features will be unavailable.
The Ultimate 3 Combi Boiler is Glow-worm’s high performance, ErP A rated boiler range developed for the one off installer market, and exclusively manufactured for Travis Perkins. Available in a choice of 30kW and 35kW models and offers both high DHW flow rates and flexible flue options. The high performance model features a manual pressure gauge for easy installation and a modern, bright, LCD display with a simple-to-use interface
The Grant Vortex Pro outdoor combination oil boiler features internal frost protection, a 24 litre expansion vessel, neon diagnostic indicators and a factory-fitted condensate trap, together with the conveniently factory-fitted, multi-directional flue - and all of this has been designed to make installation and servicing easier. With larger than normal heat exchangers, the hot water performance of this high-efficiency combi boiler is vastly increased. The two very accurate electronic temperature controls allow the boiler to operate in condensing mode on central heating and instant hot water production can be maintained.
This standard horizontal flue kit for Glow-worm boilers measures 755mm from the centre of the 90 degree bend to the start of the terminal and allows the safe disposal of gases created during the combustion process. Efficient disposal of flue gases are necessary to maintain your central heating system, as the disposed acidic gases could cause corrosion and break down of the system. Quick and easy to install, all fixings are included, for a straightforward installation process. As well as the flue pipe itself, the kit contains sealing tape, flue securing screws and a clamping band.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
The Ultimate 3 Combi Boiler is Glow-worm’s high performance, ErP A rated boiler range developed for the one off installer market, and exclusively manufactured for Travis Perkins. Available in a choice of 30kW and 35kW models and offers both high DHW flow rates and flexible flue options. The high performance model features a manual pressure gauge for easy installation and a modern, bright, LCD display with a simple-to-use interface
The Grant Vortex Pro outdoor combination oil boiler features internal frost protection, a 24 litre expansion vessel, neon diagnostic indicators and a factory-fitted condensate trap, together with the conveniently factory-fitted, multi-directional flue - and all of this has been designed to make installation and servicing easier. With larger than normal heat exchangers, the hot water performance of this high-efficiency combi boiler is vastly increased. The two very accurate electronic temperature controls allow the boiler to operate in condensing mode on central heating and instant hot water production can be maintained.
This standard horizontal flue kit for Glow-worm boilers measures 755mm from the centre of the 90 degree bend to the start of the terminal and allows the safe disposal of gases created during the combustion process. Efficient disposal of flue gases are necessary to maintain your central heating system, as the disposed acidic gases could cause corrosion and break down of the system. Quick and easy to install, all fixings are included, for a straightforward installation process. As well as the flue pipe itself, the kit contains sealing tape, flue securing screws and a clamping band.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.