Specifically formulated to have a demonstrably lower environmental impact than standard Dulux Trade products, whilst maintaining the highest possible standards of quality and performance. Ecosure Undercoat from Dulux Trade is a professional quality, durable and quick drying undercoat with good opacity and adhesion properties. Suitable for use on interior wood and metal surfaces. For best results, use in conjunction with Ecosure Gloss from Dulux Trade.
Zinsser AllCoat ® Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour.
Colour Family
Whites
Colour
White
Finish
Satin
Size
1 L
Application Method
Airless Sprayer, Brush, Pad & Roller.
Interior or Exterior Use
Interior or Exterior Use
Coverage per Litre
10m2 per litre
Drying Time
Hard dry 4 hours at 20oC and 60% RH. Full cure achieved after 7 days.
Drying time between coats
1 hour.
Washable
Yes
Clean equipment with
Warm water and liquid detergent; rinse with water.
Suitable for
Wood, metal, masonry, plastic, concrete and cladding.
Dulux Trade Quick Dry Satinwood is an advanced water-based, satin finish that provides a smooth, durable top coat for use on both interior wood and metal. With the aesthetic properties of a solvent based as well as the added beneftis of quicker recoat times and enhanced durability, it has never been so easy to switch to water based products.
Colour Family
Whites
Colour
White
Finish
Satinwood
Size
2.5 L
Application Method
Brush, Roller, Airless Spray or Conventional Spray
ONLINE ONLY- Leaking water isn't just a structural issue, it can cause ugly stains on interior surfaces that are difficult to hide. Solve the problem with one coat of this Ronseal damp seal paint. Simply brush it straight onto the affected area – you don't need to prime or undercoat the surface first. It provides a permanent block so that any unsightly damp stains don't reappear and ruin your paintwork. You can use it on interior walls and ceilings.
Before you use this paint, you must make sure you deal with the underlying cause of the damp. Once that's done, remove any mould by using a suitable treatment, prepare your surface, then it's a simple task to paint straight on using a brush or roller. You'll get up to five square metres of coverage per litre of Ronseal damp seal paint, so it should go a long way.
Specifically formulated to have a demonstrably lower environmental impact than standard Dulux Trade products, whilst maintaining the highest possible standards of quality and performance. Ecosure Undercoat from Dulux Trade is a professional quality, durable and quick drying undercoat with good opacity and adhesion properties. Suitable for use on interior wood and metal surfaces. For best results, use in conjunction with Ecosure Gloss from Dulux Trade.
Zinsser AllCoat ® Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour.
Dulux Trade Quick Dry Satinwood is an advanced water-based, satin finish that provides a smooth, durable top coat for use on both interior wood and metal. With the aesthetic properties of a solvent based as well as the added beneftis of quicker recoat times and enhanced durability, it has never been so easy to switch to water based products.
ONLINE ONLY- Leaking water isn't just a structural issue, it can cause ugly stains on interior surfaces that are difficult to hide. Solve the problem with one coat of this Ronseal damp seal paint. Simply brush it straight onto the affected area – you don't need to prime or undercoat the surface first. It provides a permanent block so that any unsightly damp stains don't reappear and ruin your paintwork. You can use it on interior walls and ceilings.
Before you use this paint, you must make sure you deal with the underlying cause of the damp. Once that's done, remove any mould by using a suitable treatment, prepare your surface, then it's a simple task to paint straight on using a brush or roller. You'll get up to five square metres of coverage per litre of Ronseal damp seal paint, so it should go a long way.