Duplex stainless steel unvented cylinder providing mains pressure hot water. The direct model comes complete with two immersions, providing the functionality to heat the store of water by utilising off-peak electricity tariffs. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The indirect model has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
A 3kW immersion heater fitted with a dual safety protection thermostat rated at 15 amp. The unit is fully approved and tested to EN60335-2-73. The thermostat is also independently approved by BEAB to EN60730-1.
The Esprit utilises Gledhill proven technologies and quality manufacturing at a competitive price. Manufactured from corrosion-resistant duplex stainless steel, the Esprit delivers mains pressure hot water, enabling high flow rates for showers & baths without the need for a pump. The Esprit has 40mm insulation to reduce heat loss, a 25 year warranty, and is supplied with full NSF WRC and WRAS independent approvals.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The direct model comes complete with two immersions, providing the functionality to heat the store of water by utilising off-peak electricity tariffs. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The indirect model has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
A 3kW immersion heater fitted with a dual safety protection thermostat rated at 15 amp. The unit is fully approved and tested to EN60335-2-73. The thermostat is also independently approved by BEAB to EN60730-1.
The Esprit utilises Gledhill proven technologies and quality manufacturing at a competitive price. Manufactured from corrosion-resistant duplex stainless steel, the Esprit delivers mains pressure hot water, enabling high flow rates for showers & baths without the need for a pump. The Esprit has 40mm insulation to reduce heat loss, a 25 year warranty, and is supplied with full NSF WRC and WRAS independent approvals.