Sundial RF 2 Pack 3 contains a wireless enabled programmer (ST9420C), a wireless thermostat (DT92E), and a wireless cylinder thermostat (CS92A). In a stored hot water heating system which has no room thermostat or cylinder thermostat the existing wiring can be used to provide Boiler Interlock by fitting Sundial RF 2 Pack 3.
The L641 is a water temperature thermostat designed for surface mounting on domestic hot water cylinders, it is supplied complete with mounting strap for rapid and easy installation, so draining of the system or tapping the cylinder is not necessary.
Sentinel R600 Thermal Fluid provides frost, lime scale and corrosion protection for air source heat pump systems. If minimum levels are maintained, the product ensures a permanent protection and does not need to be replaced.
This part is based around the diverter valve section. The diverter valve is directional water device that only appears in combi boilers. It allows the hot water to be directed to the central heating (radiators, etc.) or to the DHW system (taps, etc.). This feature is what seperates a normal boiler from a combi boiler due to the fact that a combi boiler wouldn't require a cylinder to provide heating and hot water .
Sundial RF 2 Pack 3 contains a wireless enabled programmer (ST9420C), a wireless thermostat (DT92E), and a wireless cylinder thermostat (CS92A). In a stored hot water heating system which has no room thermostat or cylinder thermostat the existing wiring can be used to provide Boiler Interlock by fitting Sundial RF 2 Pack 3.
The L641 is a water temperature thermostat designed for surface mounting on domestic hot water cylinders, it is supplied complete with mounting strap for rapid and easy installation, so draining of the system or tapping the cylinder is not necessary.
Sentinel R600 Thermal Fluid provides frost, lime scale and corrosion protection for air source heat pump systems. If minimum levels are maintained, the product ensures a permanent protection and does not need to be replaced.
This part is based around the diverter valve section. The diverter valve is directional water device that only appears in combi boilers. It allows the hot water to be directed to the central heating (radiators, etc.) or to the DHW system (taps, etc.). This feature is what seperates a normal boiler from a combi boiler due to the fact that a combi boiler wouldn't require a cylinder to provide heating and hot water .