Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Frequently bought together
Overview
- Ready to use
- One tub of adhesive per roll of Isotherm Membrane.
- Applied with a trowel
- Easy to use
- Can be applied to brick walls, although this will vastly decrease the coverage area of the product
- Can be applied to both matte and silk painted surfaces - silk painted surfaces should be lightly sanded to create a key, then remove all loose fines
Technical specification
Brand Name
Wykamol
Reviews
Be the first to review this product.
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)
Safeguard Stormdry Max Waterproofing 1L
Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.
£46.76 each (Inc. VAT)
Setcrete Acrylic Primer 2.5L
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
£26.33 each (Inc. VAT)