Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase Tanking Slurry Bba 25 Kg
Hover Over to Zoom In
Frequently bought together
Overview
- Pre-bagged and ready-to-mix
- High water pressure resistance
- Excellent bonding capabilities and efflorescence-free
- For both above and below ground
- CE-marked and BBA-approved
- Can be spray applied
Technical specification
Certifications Met
BBA
Interior or Exterior Use
Interior
Type
Tanking Slurry
Colour
Grey
Size
25 kg
Coverage per Litre
3 – 4 kg/m2, thickness 1.5 – 2 mm for pressureless water
Drying Time
5 – 8 hours
Drying time between coats
2 – 4 hours
Manufacturer Model No
TK-DRYBASE SLURRY 25kg
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
Sika 1 Integral Liquid Waterproofer 25L
Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
£417.60 each (Inc. VAT)
Safeguard Stormdry Masonry Protection 5L Cream
Stormdry Masonry Protection Cream is a deeply penetrating water-repellent silicone cream for the protection of masonry. The thick, white cream is ready to use and applied by brush, roller or airless spray. It penetrates into brickwork, masonry, mortar and concrete, where it will cure to a colourless, natural finish, lasting for over 25 years. Stormdry Cream can help improve the energy efficiency of dwellings by reducing heat loss.
£118.74 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Safeguard Dryzone Anti-mould Paint Additive 100ml
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
£9.08 each (Inc. VAT)