Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
Size
2.5 L
Suitable for
Suitable for providing tough protection against knocks, scuffs and scratches.
B-I-N Aerosol is great for priming interior surfaces and spot priming exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work and dries in minutes.
Brand Name
Zinsser
Manufacturer Model No
ZN7050001C1
Size
390 ml
Interior or Exterior Use
Interior/Exterior
Drying time between coats
Dries in 10 minuites
Suitable for
For priming interior surfaces and spot priming exterior surfaces.
ProSolve PVSMY7A Site Marker Aerosol, 750ml, in Yellow. The ProSolve Site Marker is an economical and multi-purpose aerosol line marking paint optimised for various surfaces. Its rapid-drying, high durability formulation-free from lead and xylene-makes it suitable for marking concrete, tarmac, wood, and composite substrates.
Cuprinol Exterior Wood Preserver (BP) is an exterior lightly pigmented wood preservative for rough sawn and smooth garden timbers, such as cladding, fencing, sheds, greenhouses and summerhouses. It contains active ingredients that penetrate into the timber to prevent rot, decay and blue stain. It is a water-based product that can be used near plants.
Brand Name
Cuprinol
Manufacturer Model No
5095366
Made To Order
N
Size
5 L
Interior or Exterior Use
Exterior
Colour
Gold Brown
Colour Family
Browns
Drying Time
2 - 6 hrs depending on the nature of the surface & weather conditions
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
B-I-N Aerosol is great for priming interior surfaces and spot priming exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work and dries in minutes.
ProSolve PVSMY7A Site Marker Aerosol, 750ml, in Yellow. The ProSolve Site Marker is an economical and multi-purpose aerosol line marking paint optimised for various surfaces. Its rapid-drying, high durability formulation-free from lead and xylene-makes it suitable for marking concrete, tarmac, wood, and composite substrates.
Cuprinol Exterior Wood Preserver (BP) is an exterior lightly pigmented wood preservative for rough sawn and smooth garden timbers, such as cladding, fencing, sheds, greenhouses and summerhouses. It contains active ingredients that penetrate into the timber to prevent rot, decay and blue stain. It is a water-based product that can be used near plants.