Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
H+H Celcon Brick Standard Coursing Unit 65mm
Hover Over to Zoom In
Frequently bought together
Overview
- They are suitable for use both externally and internally in load-bearing and non load-bearing situations.
- Load-bearing walls should not be constructed of Coursing Units as the only masonry unit.
- Protect against cold bridging
- Infill above doors and windows
- Coursing at floor and ceiling level
- Making up between joist
Technical specification
Height
65 mm
Length
215 mm
Width
100 mm
Weight
1.10 kg
Colour
Grey
Thermal Conductivity
0.15 W/mK
Compressive Strength
4 N per mm2
Fire Rating
Class A1
BBA Approved
Yes
Type
Coursing Unit
Manufacturer Model No
SCP100300
Made To Order
N
Brand Name
Celcon
Data sheets
Reviews
Be the first to review this product.
Marshalls Dense Concrete Common Brick Grey 215mm x 100mm x 65mm
The dense concrete common brick from Marshalls is suitable for use above and below a damp proofing course level. It can be used independently as well as in conjunction with dense aggregate blocks that provide strength and density.
£0.91 each (Inc. VAT)
Solid Ultra Low Density Concrete Block 3.6N 100mm
A low weight concrete block manufactured from a blend of lightweight aggregates and cement.
£4.39 each (Inc. VAT)
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
£4.94 each (Inc. VAT)
H+H Celcon Standard Aerated Concrete Foundation Block 3.6N 300mm
Available in Standard Grade (3.6N/mm2) and High Strength Grade (7.3N/mm2). Foundation Blocks can be used to support 3 storey constructions. They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block.
£10.82 each (Inc. VAT)