Imposes less stress on substrate during installation due to no expansion force
Small hole diameter giving high loads
Easily removed for temporary works
Suitable for use in pre-drilled 6mm diameter concrete, full and hollow bricks, stone and structural clay tile and without pre-drilling in aerated concrete and timber
Applications include use with door and window frames, suspended ceilings and lightweight steel angles
4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
This Thistle bonding coat from British Gypsum is a multi-coat plaster ideal for smooth and low suction backgrounds, including medium density blocks, dense blocks, plasterboard, painted or tiled surfaces and more. The plaster comes with a finer mix giving great workability and making it easier to apply.
Stop worrying about plaster failure on low-suction backgrounds. Plasprime GG10L Green Grit is a high-performance, aggregate-filled bonding agent designed to provide an exceptional mechanical key. Whether you are dealing with smooth concrete, ceramic tiles, or old plaster, this 10L professional-grade primer ensures your finish coat stays exactly where it belongs.
Made To Order
N
Manufacturer Model No
GG10l
Country Origin
United Kingdom
Brand Name
Plasprime
Colour
Green
Finish
Matt Abrasive
Size
10L
Application Method
6" Emulsion Brush OR any other suitable brush OR Roller
Interior or Exterior Use
Interior
Coverage per Litre
4M2
Drying Time
up to 24 Hours (depending on ambient temperature)
Drying time between coats
Only one coat required
Clean equipment with
Water
Suitable for
Most substrates and concrete free from mold release agents
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.
4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
This Thistle bonding coat from British Gypsum is a multi-coat plaster ideal for smooth and low suction backgrounds, including medium density blocks, dense blocks, plasterboard, painted or tiled surfaces and more. The plaster comes with a finer mix giving great workability and making it easier to apply.
Stop worrying about plaster failure on low-suction backgrounds. Plasprime GG10L Green Grit is a high-performance, aggregate-filled bonding agent designed to provide an exceptional mechanical key. Whether you are dealing with smooth concrete, ceramic tiles, or old plaster, this 10L professional-grade primer ensures your finish coat stays exactly where it belongs.
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.