High levels of fire resistance and sound insulation
Technical specification
Manufacturer Model No
HOLLOW140
Brand Name
Cemex
Reaction to Fire BS476 Standard
Class 0
Reaction to Fire Euro Class
Class A1
Fire Resistance Minutes
120 minutes (2 hours) for standard load-bearing, extended to 240 minutes (4 hours) if hollow core voids are fully filled with cast-in concrete and steel reinforcement.
The NDC Polipak DPC 225mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards set forth in BS 6515 (1984). Additionally, it is CE marked in accordance with EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
H+H's Celcon Blocks High Strength Grade (7.3N/mm2 identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Reaction to Fire Euro Class
Class A1
Height
215 mm
Fire Resistance Minutes
Up to 120 minutes (2 hours) for load-bearing, and up to 240 minutes (4 hours) for non-load-bearing 100mm structural wall systems.
Visqueen HP Tanking Primer is a black elastomeric bituminous priming solution designed to prepared surfaces prior to the application of Visqueen Self Adhesive Membrane and Torch on Membranes
12mm 100 x 10,000 rolls of Brickfill closed cell cross linked polyethylene foams for all your requirements for brick and blockwork expansion and movement joints packed in 10 rolls per merchant pack.
The NDC Polipak DPC 225mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards set forth in BS 6515 (1984). Additionally, it is CE marked in accordance with EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
H+H's Celcon Blocks High Strength Grade (7.3N/mm2 identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Visqueen HP Tanking Primer is a black elastomeric bituminous priming solution designed to prepared surfaces prior to the application of Visqueen Self Adhesive Membrane and Torch on Membranes
12mm 100 x 10,000 rolls of Brickfill closed cell cross linked polyethylene foams for all your requirements for brick and blockwork expansion and movement joints packed in 10 rolls per merchant pack.