Your Trade Prices
Login to view your exclusive prices
Solid Medium Density Concrete Block 7.3N 140mm
922301
Check live branch stock
Overview
A low weight concrete building block designed for thermal efficiency and manual handling considerations.
- A medium weight solid block for use internally and externally
- Ideal for plaster finishes and rendered outer leaves
- Straightforward, conventional block laying practice
- Secure background for fixings
- Good levels of strength, fire resistance and sound insulation
- Any level of thermal performance can be achieved with additional insulation
Technical specification
Height
215 mm
Length
440 mm
Width
140 mm
Colour
Grey
Compressive Strength
7.30 N per mm2
Type
Medium Density Block
Manufacturer Model No
1862
Brand Name
Aggregate Industries
Data sheets
Reviews
H+H Celcon Brick Standard Coursing Unit 65mm Pack of 600
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
Show More£432.00 per pack (Inc. VAT)
Quick view
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Show More£344.16 per pack (Inc. VAT)
Quick view
H+H Celcon Solar Aerated Concrete Block 2.9N 100mm Pack of 120
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Show More£220.32 per pack (Inc. VAT)
Quick view
H+H Celcon Standard Aerated Concrete Block Grey 3.6N 440mm x 100mm x 215mm
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
Show More£1.75 each (Inc. VAT)
Quick view