Lovely jubly, worked a treat for what I needed xxx
Merchant Response Dear valued customer, thank you so much for the review of the blockheads that you recently purchased. Your steps look brilliant! We hope we can help you on your next successful project!
Kind regards, Travis Perkins Team
1 year ago
customer
Type of purchase: Trade
Yes, I would recommend to a friend
0
0
5
Excellent customer service and good product!
Used to create shed base to keep timber base off the ground to allow air circulation and prevent rot - perfect!
TP staff most helpful, thank you!
4 years ago
Kathryn
Type of purchase: DIY
Yes, I would recommend to a friend
1
3
5
What you expect
Great service and blocks are very good quality.
4 years ago
Daniel
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
Good quality product
Used these blocks to build a base for a new shed. Very solid (and very heavy). Ideal for the job. Very satisfied.
4 years ago
Roy
Type of purchase: DIY
Yes, I would recommend to a friend
0
1
5
Yes
Polite helpful staff at counter and in yard
5 years ago
jamie
Type of purchase: Trade
Yes, I would recommend to a friend
0
2
5
i would buy this again
really heavy blocks, just what I wanted to build small wall in garden
5 years ago
Michael
Type of purchase: DIY
Yes, I would recommend to a friend
1
1
5
Good blocks at a good price
Bought these blocks to sit a large shed on much cheaper than laying a concrete base and once set in the ground they make a good solid foundation
5 years ago
malcolm
Type of purchase: DIY
Yes, I would recommend to a friend
2
4
5
I would buy again and would recommend
Delivered on the day arranged and are a good solid block, used to build a small retaining wall.
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion