Bostik Rapid Setting Cement is a versatile product that is ideal for a variety of interior and exterior installation, repair, and maintenance projects. It is particularly well-suited for the installation of sanitary fittings, drainage systems, and the upkeep of concrete floors, paths, and steps.
Mastercrete contains cement quality improver to give the following benefits compared with ordinary Portland cement: lower water demand, more cohesive mix, less tendency for water to segregate and bleed and enhanced resistance of hardened concrete or mortar to freeze/thaw attack. Mastercrete is also 39% better for the environment. Comes in a convenient weatherproof plastic bag.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Brand Name
Setcrete
Manufacturer Model No
T0600K2A
Colour
Green
Size
2.50 L
Drying Time
20-60 min
Suitable for
used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard
Sovereign Hey’di K11 is a salt-resistant cementitious tanking compound for the protection of structures against water from the ground, and which may be subject to hydrostatic pressure. It can be used on the external side of buildings below ground level where positive pressure exists or on the internal (negative) side without the need to build supporting walls. The Sovereign Hey’di tanking system is fully covered by the British Board of Agreement Certificate 91/2608. Once cured, K11 is impervious to water, and the system has been independently tested to withstand greater than 10 bars of pressure on the negative side (over 100 metres head of water) with a coating thickness of 4 mm in two coats.
Size
25 kg
Material
Blend of Cement, Portland Cement, Additives, Flue Dust
Colour
Grey
Usage
Salt-resistant cementitious tanking compound for protecting structures from water ingress and hydrostatic pressure. Suitable for internal (negative) and external (positive) applications, waterproofing basements, cellars, water tanks, bunds, pools, and salt-contaminated walls
Coverage
Varies Depending on Subrstate and Application Method
Bostik Rapid Setting Cement is a versatile product that is ideal for a variety of interior and exterior installation, repair, and maintenance projects. It is particularly well-suited for the installation of sanitary fittings, drainage systems, and the upkeep of concrete floors, paths, and steps.
Mastercrete contains cement quality improver to give the following benefits compared with ordinary Portland cement: lower water demand, more cohesive mix, less tendency for water to segregate and bleed and enhanced resistance of hardened concrete or mortar to freeze/thaw attack. Mastercrete is also 39% better for the environment. Comes in a convenient weatherproof plastic bag.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Sovereign Hey’di K11 is a salt-resistant cementitious tanking compound for the protection of structures against water from the ground, and which may be subject to hydrostatic pressure. It can be used on the external side of buildings below ground level where positive pressure exists or on the internal (negative) side without the need to build supporting walls. The Sovereign Hey’di tanking system is fully covered by the British Board of Agreement Certificate 91/2608. Once cured, K11 is impervious to water, and the system has been independently tested to withstand greater than 10 bars of pressure on the negative side (over 100 metres head of water) with a coating thickness of 4 mm in two coats.