Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Frequently bought together
Overview
- Crack-bridging waterproofer, ready for use
- Water resistant and low shrinkage
- Suitable for cracks up to 1 cm
- Blends in visually with sand, cement
- Seals cracks to prevent rain penetration
Technical specification
Size
310ml
Interior or Exterior Use
Exterior
Coverage per Litre
300 cm3
Drying Time
1 - 7 days depending on conditions
Time to Full Cure
2 - 14 days depending on conditions
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
Mortar
Brand Name
Stormdry
Manufacturer Model No
DM-STORMDRY XR MORTAR
Data sheets
Reviews
Be the first to review this product.
Safeguard Dryzone Mould Eliminator 5L
Dryzone Mould Eliminator is a bleach-based and hygienic surface cleaner designed to quickly remove mould and mildew from household surfaces. Ideal for use in bathrooms and kitchens, spray directly onto mould and mildew affected surfaces. Once applied, the powerful formula acts immediately and usually eliminates mould in less than three minutes before being washed away to reveal a clean and mould-free surface.
£43.66 each (Inc. VAT)
Safeguard Drybase TS-Plus Tanking Slurry 20kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£30.73 each (Inc. VAT)
Safeguard Dryzone Anti-mould Paint Additive 100ml
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
£9.08 each (Inc. VAT)
Safeguard Drybase TS-Plus Polymer Tanking Kit 12kg
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
£50.46 each (Inc. VAT)