Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Brand Name
Setcrete
Manufacturer Model No
T0600K2A
Colour
Green
Size
2.50 L
Drying Time
20-60 min
Suitable for
used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard
Sovereign Hey’di K11 is a salt-resistant cementitious tanking compound for the protection of structures against water from the ground, and which may be subject to hydrostatic pressure. It can be used on the external side of buildings below ground level where positive pressure exists or on the internal (negative) side without the need to build supporting walls. The Sovereign Hey’di tanking system is fully covered by the British Board of Agreement Certificate 91/2608. Once cured, K11 is impervious to water, and the system has been independently tested to withstand greater than 10 bars of pressure on the negative side (over 100 metres head of water) with a coating thickness of 4 mm in two coats.
Size
25 kg
Material
Blend of Cement, Portland Cement, Additives, Flue Dust
Colour
Grey
Usage
Salt-resistant cementitious tanking compound for protecting structures from water ingress and hydrostatic pressure. Suitable for internal (negative) and external (positive) applications, waterproofing basements, cellars, water tanks, bunds, pools, and salt-contaminated walls
Coverage
Varies Depending on Subrstate and Application Method
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Stormdry MAX Enhanced Waterproofing Barrier is a clear gel coating providing lasting waterproofing, crack-bridging and anti-graffiti protection. It can be used on masonry, stone, concrete, selected metals and painted surfaces. It can be used as a top coat for Stormdry Masonry Protection Cream when multiple fine cracking is seen on the wall surface. Stormdry Max bridges cracks up to 0.6 mm wide providing protection against penetrating damp, giving up to 10 years weather protection. In anti-graffiti application, it will take up to 15 wash cycles to eliminate any graffiti applied to the surface coating and offers low-level flood resistance. The clear liquid is air moisture curing and is ready for use. It can be applied by brush and roller. The coating is partially breathable and gives a semi-gloss appearance which fades with time.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Sovereign Hey’di K11 is a salt-resistant cementitious tanking compound for the protection of structures against water from the ground, and which may be subject to hydrostatic pressure. It can be used on the external side of buildings below ground level where positive pressure exists or on the internal (negative) side without the need to build supporting walls. The Sovereign Hey’di tanking system is fully covered by the British Board of Agreement Certificate 91/2608. Once cured, K11 is impervious to water, and the system has been independently tested to withstand greater than 10 bars of pressure on the negative side (over 100 metres head of water) with a coating thickness of 4 mm in two coats.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.