The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
IKO Shed Felt is an economical, bituminous, fibre based roofing felt with a protective and decorative fine mineral finish. It is used to waterproof and protect a variety of common garden buildings, such as sheds, summerhouses, kennels and hutches
A compound rubber and bitumen joint sealing strip for sealing the joints of precast concrete units to provide a permanently flexible watertight seal when compressed between joint faces previously primed with Densostrip Primer.
The SmartVerge Ambidextrous dry verge system is a fast and effective method for finishing the verge of roof that has been fitted with small or large format interlocking tiles
The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
IKO Shed Felt is an economical, bituminous, fibre based roofing felt with a protective and decorative fine mineral finish. It is used to waterproof and protect a variety of common garden buildings, such as sheds, summerhouses, kennels and hutches
A compound rubber and bitumen joint sealing strip for sealing the joints of precast concrete units to provide a permanently flexible watertight seal when compressed between joint faces previously primed with Densostrip Primer.
The SmartVerge Ambidextrous dry verge system is a fast and effective method for finishing the verge of roof that has been fitted with small or large format interlocking tiles