4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
Knauf AQUAPANEL Indoor systems provide the peace of mind that results from specifying a partition or a lining that is specifically designed for the job and that will continue to perform, even when wet.
Gyproc Thermaline Plus is a wallboard bonded to a expanded polystyrene insulant, with integral vapour control provided by the products closed cell structure in the foam. A cost-effective thermal laminate for new and existing buildings requiring a mid to high thermal performance levels.
Used as the vertical support in wall framing, these products are available in a range of widths, lengths and gauge depending on requirements for strength, height, impact resistance and sound insulation. The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.
4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
Knauf AQUAPANEL Indoor systems provide the peace of mind that results from specifying a partition or a lining that is specifically designed for the job and that will continue to perform, even when wet.
Gyproc Thermaline Plus is a wallboard bonded to a expanded polystyrene insulant, with integral vapour control provided by the products closed cell structure in the foam. A cost-effective thermal laminate for new and existing buildings requiring a mid to high thermal performance levels.
Used as the vertical support in wall framing, these products are available in a range of widths, lengths and gauge depending on requirements for strength, height, impact resistance and sound insulation. The Gypframe ‘C’ Stud design includes sight lines down the legs of the stud to ease board alignment and increase profile strength.