Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase Liquid Damp-proof Membrane 1L Black
Hover Over to Zoom In
Overview
- High-Strength damp proof barrier
- Low Odour and water-based
- Versatile damp proof membrane
- Quick-Drying & Strong Bonding
- Effective barrier againt water, vapour, Co2, methane and radon
- Suitable for wet rooms, under flooring, embedded timbers, sunken posts, flood resilience
Technical specification
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
Drying Time
1 hour
Time to Full Cure
24 hours
VOC Level
Minimal 0-0.29%
Colour
Black
Type
Damp-Proof Membrane
Manufacturer Model No
TK-DRYBASE BLACK 1L
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
Ndc Polipak Dpc 225mm x 30m
The NDC Polipak DPC 225mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards set forth in BS 6515 (1984). Additionally, it is CE marked in accordance with EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
£17.84 each (Inc. VAT)
NEW
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
£77.40 each (Inc. VAT)
NEW
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£181.82 each (Inc. VAT)
NEW
Sovereign CDM8 Rapid Seal Plugs and Washers are manufactured from polypropylene giving a corrosion resistant fixing. The two-piece plug comprises of an expansion pin and fixing body for fixing through insulation into a solid substrate and into COB wall construction, as part of the SovDrain waterproofing system.
£73.80 each (Inc. VAT)