Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase Plaster Membrane Plugs Pack Of 150
Hover Over to Zoom In
Frequently bought together
Overview
- Plaster membrane plugs specially designed for Drybase Plaster Membrane
- Sturdy, corrosion resistant polypropylene fixing plugs
- Use 13 plaster plugs per square metre
- Helps to save time during installation
- Provides a tight damp-proof seal
- 150 plugs, covers for 10m2
Technical specification
Size
150 Pack
Interior or Exterior Use
Interior
Drying Time
N/A
VOC Level
Minimal 0-0.29%
Colour
Orange
Type
Plaster Membrane Plugs
Manufacturer Model No
CM-PLASTER PLUGS 150
Brand Name
Drybase
Reviews
Be the first to review this product.
Safeguard Drybase Overseal Tapes 150MM X 20M
Waterproof butyl overseal tape primarily used to link the perpendicular joint between wall membrane and floor membrane installations. Also used to seal joints on floor membrane applications and for detailing penetrating services.
£70.38 each (Inc. VAT)
Safeguard Drybase Flex Membrane 1.2 X 15 M
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
£166.02 each (Inc. VAT)
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Safeguard Dryzone DPC Cream Bba 310ml
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall. BBA approved.
£19.24 each (Inc. VAT)