Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Sovereign 30806092 CDM20 Membrane Roll 2M x 20M
Hover Over to Zoom In
Frequently bought together
Overview
- Easily cut to shape and size using a knife or scissors
- Typically finished with either a SBR Bonding Agent modified screed (minimum 65 mm) or a floating floor
- 20mm stud height
Technical specification
Size
2m x 20m
Length
20m
Thickness
1mm
Width
2m
Material
HDPE (High Density Polyethylene)
Colour
Black
Coverage
38.6m²
Drying Time
Instant
Pack Quantity
1
Certifications Met
BBA Approved
Type
Cavity Drainage Membrane
Brand Name
Sovereign
Reviews
Be the first to review this product.
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Safeguard Drybase Flex Membrane 1.2 X 15 M
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
£166.02 each (Inc. VAT)
Sovereign 30806093 CDM Plug Washers Pack 100
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications.
£2,311.20 each (Inc. VAT)
Safeguard Drybase Liquid Damp-proof Membrane 1L Black
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
£22.06 each (Inc. VAT)