The innovative grooving stop allows the adjustment of the cutting depth for grooving and rebating applications
Linear horizontal rails utilise bronze guides to provide maximum precision when cutting materials up to 345 mm wide
Outstanding dust control and deflection away from cutting area
The large dual sliding fence gives maximum support in large material cuts at any angle or combination of angles
Technical specification
Maximum Torque
57.5 Nm for the Hammer Drill and 163 Nm for the Impact Driver.
Maximum in Masonry
10 mm
Maximum in Wood
20 mm
Maximum in Steel
10 mm
Weight
3.5 kg
Power Type
Cordless
Battery Type
Lithium-ion
Battery Storage Capacity
3 Ah
Voltage
12 V
Includes
1 x DCD706 Brushless Sub-Compact Hammer Drill Driver
1 x DCF801 Brushless Sub-Compact Impact Driver
2 x 3.0Ah Batteries
1 x Multi-Voltage Charger
1 x TSTAK II Kit Box
New TurboBoost switch boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety. The orbit diameter range has increased from 3 - 6 mm to 2.8 or 6.2 mm giving a finer finish (2.8 mm) and higher stock removal (6.2 mm) capability allowing the machine to work harder so you don?t have to. Improved dust retention system through use of Metabo Intec filter cartridge.
State-of-the-art compact hot water pressure washer with unique eco!efficiency mode that reduces diesel consumption by 20% without compromising daily cleaning performance. The HDS 6/12 C also features Karcher's unique Machine Protector system that prolongs component life and protects the coil. With central one-button operation, excellent mobility and superb cleaning performance the HDS 6/12 is easy to set-up, intuitive to operate and cheap to run.
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
1 x M18 FPD3 FUELâ„¢ Gen 4 13mm Percussion/Combi Hammer Drill 1 x M18 FID3 FUELâ„¢ Gen 4 1/4" Hex Impact Driver 2 x M18 B5 18V 5.0Ah REDLITHIUMâ„¢ Battery Packs 1 x M12-18FC Dual-Voltage Rapid Battery Charger (Charges an M18 5.0Ah battery in ~59 minutes) 1 x Heavy-Duty Blow-Moulded Carry Case (Dynacase/HD Box) 1 x Side Handle (for the Combi drill), all-metal reversible belt clips, and bit holders
The V-TUF VTUF240T is a stainless steel covered, tough well built, well proven, reliable 240 Volt Electric Pressure Washer with the ideal balance of pressure (100 bar / 1500psi) and flow (12 litres per min) on 240 volt electric supply for use in the car wash, hire and agricultural industry.
New TurboBoost switch boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety. The orbit diameter range has increased from 3 - 6 mm to 2.8 or 6.2 mm giving a finer finish (2.8 mm) and higher stock removal (6.2 mm) capability allowing the machine to work harder so you don?t have to. Improved dust retention system through use of Metabo Intec filter cartridge.
State-of-the-art compact hot water pressure washer with unique eco!efficiency mode that reduces diesel consumption by 20% without compromising daily cleaning performance. The HDS 6/12 C also features Karcher's unique Machine Protector system that prolongs component life and protects the coil. With central one-button operation, excellent mobility and superb cleaning performance the HDS 6/12 is easy to set-up, intuitive to operate and cheap to run.
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
The V-TUF VTUF240T is a stainless steel covered, tough well built, well proven, reliable 240 Volt Electric Pressure Washer with the ideal balance of pressure (100 bar / 1500psi) and flow (12 litres per min) on 240 volt electric supply for use in the car wash, hire and agricultural industry.