I used these in an old "Arrow" staple gun. I found they worked perfectly. The staples didn't break up into small segments when handled and didn't jam in the staple gun.
The IM65 is a compact, quick and durable straight finish nailer with no-mar tip to enable precise fixing. The new Paslode IM65 has been developed with productivity front of mind. Without cutting corners on the renowned Paslode quality and reliability, allowing you to be faster to the finish and on to your next job in no time at all. Perfect for use on application into wood and MDF, including skirting, beading, architrave, stair rails and much more.
Roughneck fencing pins have a top hook for securing rope or hazard tape when marking off areas where work is in progress or where general access is restricted. Manufactured from carbon steel and fully painted for protection against corrosion, featuring hardened tips for use in hard ground.
The STANLEY® FATMAX® Xtreme™ 5M/16' Tape Measure, with 32mm blade width for clear and legible markings, is class II accurate, providing a reassuring +/-0,5mm error tolerance at 1m, suitable for the majority of professionals. Its abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, with additional BladeArmor™ coating, reinforcing the first 7.5cm of the blade, the section most vulnerable to wear. The tape measure features a 32mm blade width and an impressive reach of 4.9 metres The TRU-ZERO™ hook helps to achieve precise inner and outer measurements, moving back and forth along the securing rivets. Highly polished chrome case with rubber grip to ensure slip resistant hold to withstand heavy use on the jobsite. The tape comes with a large, protruding oversized multi-catch hook, significantly larger than a conventional hook and protruding on all edges - shaped to hook onto building materials with ease above, below and to either side. The bright yellow STANLEY blade ensures enhanced visibility in most jobsite conditions.
STANLEY TYLON 8m tape featuring a compact and robust body with belt clip, the TYLON blade coating gives better wear and resustenmce than traditional laquer with a matt finish for easy reading while the Tru Zero hook ensures accurate measurements, inside and out.
The IM65 is a compact, quick and durable straight finish nailer with no-mar tip to enable precise fixing. The new Paslode IM65 has been developed with productivity front of mind. Without cutting corners on the renowned Paslode quality and reliability, allowing you to be faster to the finish and on to your next job in no time at all. Perfect for use on application into wood and MDF, including skirting, beading, architrave, stair rails and much more.
Roughneck fencing pins have a top hook for securing rope or hazard tape when marking off areas where work is in progress or where general access is restricted. Manufactured from carbon steel and fully painted for protection against corrosion, featuring hardened tips for use in hard ground.
The STANLEY® FATMAX® Xtreme™ 5M/16' Tape Measure, with 32mm blade width for clear and legible markings, is class II accurate, providing a reassuring +/-0,5mm error tolerance at 1m, suitable for the majority of professionals. Its abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, with additional BladeArmor™ coating, reinforcing the first 7.5cm of the blade, the section most vulnerable to wear. The tape measure features a 32mm blade width and an impressive reach of 4.9 metres The TRU-ZERO™ hook helps to achieve precise inner and outer measurements, moving back and forth along the securing rivets. Highly polished chrome case with rubber grip to ensure slip resistant hold to withstand heavy use on the jobsite. The tape comes with a large, protruding oversized multi-catch hook, significantly larger than a conventional hook and protruding on all edges - shaped to hook onto building materials with ease above, below and to either side. The bright yellow STANLEY blade ensures enhanced visibility in most jobsite conditions.
STANLEY TYLON 8m tape featuring a compact and robust body with belt clip, the TYLON blade coating gives better wear and resustenmce than traditional laquer with a matt finish for easy reading while the Tru Zero hook ensures accurate measurements, inside and out.