Eco-Cavity achieves high levels of thermal performance for thinner constructions whilst maintaining a clear residual air gap and effective protection against driving rain.
BBA certified
Boards are specifically designed to combine accurately with standard sized bricks/blocks
Enables easy installation of wall ties
Will not rot, sag or decay within the cavity wall
Out performs traditional insulants by 50% - you need approximately half the thickness
Technical specification
Manufacturer Model No
CAV50
Brand Name
Ecotherm
Length
1200 mm
Thickness
50 mm
Width
450 mm
Material
Rigid polyisocyanurate PIR foam core with aluminium foil composite to both sides
Usage
New build and upgrading thermal performance of existing cavity walls
An A1 Non-Combustible Glass Mineral Wool slab, manufactured using Knauf Insulation's unique ECOSE® Technology, and is specifically designed for use as full fill insulation in masonry cavity walls.
Depth
50 mm
Length
1200 mm
Thickness
50 mm
Width
455 mm
Material
Glass Mineral Wool
Colour
Brown
Thermal Conductivity
0.037 W/mK
Usage
Masonry Cavity Walls
Coverage
6.55m2
Pack Quantity
12
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
Celotex GA4000 is an easy to install polyisocyanurate
(PIR) insulation board with excellent thermal performance,
featuring a low emissivity foil facing. Available in thicknesses
from 50mm to 100mm, it can be considered for roof, wall
and floor applications.
Made To Order
N
Manufacturer Model No
GA4100
Brand Name
Celotex
Range Description
Insulation Board
Length
2400 mm
Thickness
100 mm
Width
1200 mm
Material
PIR
Coverage
2.88 m2
Thermal Conductivity
0.022 W/mK
Certifications Met
BBA Certificate Number 16/5352
BBA Certificate Number 17/5405
This insulation board by Kay-Metzeler is manufactured in expanded polystyrene that features high compressive strength. This board is covered with a highly resistant fibre-woven film and this covering overhangs the board by 50mm, enabling the overlaps to be taped to form a continuous, seamless surface. Ideal under screed as an insulation solution. Provides coverage area of 34.56m2.
Recticel Powerdeck® U is a high performance and easy to install flat roof insulation board suitable for torch-on felt. Powerdeck® U is a high performance rigid PIR insulation board for use in warm flat roofs with bituminous torch-on felt waterproofing systems. Its optimum stability, strength and structural integrity allows for the flattest finish. Combined with its precision-cut dimensions, your installation is quicker, easier and more cost effective.
Length
1200 mm
Thickness
50 mm
Width
600 mm
Material
PIR
Usage
Warm flat roofs with any hot applied waterproofing system (including torch-on) and any bitumen compatible single-ply membrane system.
An A1 Non-Combustible Glass Mineral Wool slab, manufactured using Knauf Insulation's unique ECOSE® Technology, and is specifically designed for use as full fill insulation in masonry cavity walls.
Celotex GA4000 is an easy to install polyisocyanurate
(PIR) insulation board with excellent thermal performance,
featuring a low emissivity foil facing. Available in thicknesses
from 50mm to 100mm, it can be considered for roof, wall
and floor applications.
This insulation board by Kay-Metzeler is manufactured in expanded polystyrene that features high compressive strength. This board is covered with a highly resistant fibre-woven film and this covering overhangs the board by 50mm, enabling the overlaps to be taped to form a continuous, seamless surface. Ideal under screed as an insulation solution. Provides coverage area of 34.56m2.
Recticel Powerdeck® U is a high performance and easy to install flat roof insulation board suitable for torch-on felt. Powerdeck® U is a high performance rigid PIR insulation board for use in warm flat roofs with bituminous torch-on felt waterproofing systems. Its optimum stability, strength and structural integrity allows for the flattest finish. Combined with its precision-cut dimensions, your installation is quicker, easier and more cost effective.