Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Simpson JHM225/150 Masonry Supported Joist Hanger
Hover Over to Zoom In
Overview
- Built-in inspection slot at the base of the hanger to aid inspection from the ground
- The top flange provides the widest area in contact with masonry support allowing superior performance
- Embossments on JHM stiffen top flange and holes allowing improved mortar keying.
- Safe working load for joists shot fired to steel girders is 5.17kN
- JHM side flange on deeper hangers is much higher than the traditional style, providing greatly enhanced resistance to joist rotation
Technical specification
Height
225 mm
Thickness
2 mm
Width
150 mm
Material
Pre-Galvanised Steel
Finish
Galvanised
Pack Quantity
1
Type
Joist Hanger
Range Description
Builder Metalwork
Brand Name
Simpson Strong-Tie
Manufacturer Model No
JHM225/150
Data sheets
Reviews
Be the first to review this product.
Simpson JHA270/75 Timber to Timber Joist Hanger
JHAs are height-adjustable joist hangers used to support timber joists from timber members. This can be fitted quickly and accurately due to the adjustable height strap, location tab, and speed prongs.
This product is the standard leg (JHA270) version and can be installed directly on the bearing joist or wrapped over the top to achieve higher performance.
£1.68 each (Inc. VAT)
Simpson Strong Tie 120 x 55 x 30mm Adjustable Reinforced Angle Bracket (Box of 50)
The Simpson EFIXR range of brackets are adjustable angle brackets with 2 obround fixing holes. The EFIXR angle brackets are intended for all assemblies and installations of interior and exterior joinery. The reinforcing notch improves stiffness & rigidity.
£131.40 per box (Inc. VAT)
Simpson Strong-Tie Girder Truss Clip 47 mm wide TCP47
The TCP47 truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.
£0.60 each (Inc. VAT)
Simpson Strong Tie Light Duty Angle Bracket 40 x 40 x 15mm (Pack of 100)
Simpson Strong-Tie Angle Bracket 40 x 40 x 15mm (L x H x W) is a light duty steel angle bracket with electro galvanised finish. It is commonly used to reinforce furniture frames and other structural parts. This bracket comes with 4.2mm screw/nails holes‚ for easy installation.
£194.40 per pack (Inc. VAT)